THỜI GIAN CHƯƠNG TRÌNH HÀNG TUẦN AHC15A

THỜI GIAN CHƯƠNG TRÌNH HÀNG TUẦN AHC15A

THỜI GIAN CHƯƠNG TRÌNH HÀNG TUẦN AHC15A

● Cài đặt DIN RALL
● Cài đặt trước nâng cao một tuần trước
● Công tắc thời gian mục đích chung của thiết bị điện tử kỹ thuật số với các chương trình hàng ngày và
● Lặp lại các chương trình với 16 cài đặt bật / tắt, các chương trình xung 18 lần, và bật / tắt thủ công
● Dự trữ năng lượng pin lithium khi nguồn điện bị cắt.
● Tự động sửa lỗi thời gian ± 30 giây, hàng tuần

● Xếp hạng điện áp: 220VAC 50 / 60HZ
● Giới hạn điện áp: AC 180v ~ 250v
● Hysteresis≤2 giây / ngày (25 ℃）
● Hoạt động ON / OFF: 16 ON & 16 OFF, xung 18 lần
● tiêu thụ điện năng:
● Màn hình: LCD
● Tuổi thọ dịch vụ: cơ bản 107
● Điện 105
● khoảng thời gian tối thiểu: l phút
● trọng lượng: khoảng 150g

● Đếm: xuống: 1 giây – 99 phút 59 giây
● xung: 1 giây – 99 phút 59 giây
● Tải công suất: tải điện trở: 16A / 250VAC
Tải trễ: 10A / 250VAC
đèn tải: 2000W

● Chuyển đổi số liên lạc: 1 công tắc chuyển đổi
● dự trữ năng lượng: 3 năm (pin lithium)
● Nhiệt độ môi trường xung quanh: -10 ～ 40 ℃
● Độ ẩm môi trường: 35 ～ 85% RH

HƯỚNG DẪN HOẠT ĐỘNG

1. thời gian đầu tiên sử dụng thời gian chuyển đổi này, xin vui lòng nhấn phím reset.
2. Lần đầu tiên, công tắc thời gian ở chế độ 24h. Nếu bạn muốn thay đổi chế độ 12h, vui lòng nhấn phím “” 5 giây.
Và màn hình LCD sẽ hiển thị AM Nếu bạn muốn rechang đến chế độ 24h, và nhấn phím “” 5 giây để quay trở lại.
3. lập trình: thiết lập trên và tắt cùng một thời gian. Có 30 giây để kiểm soát chuông

https://www.timer-switch.com/ahc15a-lcd-weekly-programmable-timer-switch.html

सप्ताहानाप्रोग्रामटिमरएएचसी15ए

सप्ताहानाप्रोग्रामटिमरएएचसी15ए

सप्ताहानाप्रोग्रामटिमरएएचसी15ए

●दीनरोलस्थापना 
●एकसप्ताहपहलेउन्नतपूर्व-सेटिंग 
●डिजिटलइलेक्ट्रॉनिक्स一般资讯उद्देश्य当地时间Hotel详细信息कार्यक्रमकेसाथ当地时间स्विच 
●16चालू/बंदसेटिंग्स，18बारपल्सप्रोग्राम，औरमैन्युअलरूपसेचालू/बंदकरनेकेसाथप्रोग्रामदोहराएं 
●बिजली कीआपूर्तिकाटतेसमयलिथियमबैटरीपावररिजर्व。
●免费停车场30सेकंड，साप्ताहिक

●वोल्टेजरेटिंग：220VAC 50 / 60HZ 
●वोल्टेजसीमा：एसी180V〜250V 
●Hysteresis≤2सेकंड/दिन（25℃）
●चालू/बंदऑपरेशन：16चालूऔर16बंद，18नाड़ीगुना 
●बिजलीकीखपत：
●प्रदर्शन： एलसीडी 
●的服务台जीवन：mechancally 107 
●विद्युत105 
●न्यूनतमअंतराल：मिनटएल 
●वजन：लगभग150ग्राम

●गणनाकरें：नीचे：1सेकंड-99min 59sec 
●नाड़ी：1सेकंड-99min 59sec 
●लोडक्षमता：प्रतिरोधीभार：16ए/ 250 
वीएसीलोडिंगलोड：10ए/ 250 
वीएसीदीपकभार：2000W

●संपर्कस्विचिंग：1परिवर्तनस्विच 
●पावररिजर्व：3साल（लिथियमबैटरी）
●परिवेशकातापमान：-10~40℃ 
●परिवेशआर्द्रता：35~85％आरएच

शपरेटिंगनिर्देश

1.पहलीबारइसबारस्विचकाउपयोगकरें，कृपयारीसेटकुंजीदबाएं。
2.पहलीबार，समयस्विच24hमोडमेंहै。यदिआप12Hमोडमेंबदलनाचाहतेहैंतोकृपयाकुंजी5सेकंडपरदबाएं。
औरएलसीडीएएमप्रदर्शितकरेगायदिआप24小时मोडमेंरीचेंजकरनाचाहतेहैं，औरवापसआनेकेलिएकुंजी5सेकंडदबाएं。
3.प्रोग्रामिंग：घंटीकोनियंत्रितकरनेकेलिए30सेकंडसेकंडपरसेटकरेंऔरबंदकरें

https://www.timer-switch.com/ahc15a-lcd-weekly-programmable-timer-switch.html

ตัวตั้งเวลาโปรแกรม AHC15A

ตัวตั้งเวลาโปรแกรม AHC15A

ตัวตั้งเวลาโปรแกรม AHC15A

●การติดตั้ง DIN RALL
●ตั้งค่าล่วงหน้าล่วงหน้าหนึ่งสัปดาห์ก่อน
●สวิทช์เวลาใช้งานทั่วไปสำหรับดิจิตอลอิเลคทรอนิคส์ด้วยทุกวันและทุกโปรแกรม
●ทำซ้ำกับโปรแกรมด้วยการตั้งค่าเปิด / ปิด 16 ครั้ง, โปรแกรมชีพจร 18 ครั้งและเปิด / ปิดด้วยตัวเอง
●แบตเตอรี่ลิเธียมสำรองเมื่อจ่ายกระแสไฟฟ้า
●การแก้ไขข้อผิดพลาดอัตโนมัติเวลา± 30 วินาที, รายสัปดาห์

●การจัดระดับแรงดันไฟฟ้า: 220VAC 50 / 60HZ
●ขีด จำกัด แรงดันไฟฟ้า: AC 180v ~ 250v
●Hysteresis≤2วินาที / วัน (25 ℃)
●การทำงาน ON / OFF: 16 ON & 16 OFF, 18 ครั้งชีพจร
●การใช้พลังงาน:
จอแสดงผล: LCD
●อายุใช้งาน: มีกลไก 107
●ไฟฟ้า 105
●ช่วงเวลาต่ำสุด: l นาที
●น้ำหนัก: ประมาณ 150 กรัม

●จำนวน: ลดลง: 1 วินาที – 99 นาที 59 วินาที
●ชีพจร: 1 วินาที – 99 นาที 59 วินาที
●กำลังรับน้ำหนัก: โหลดตัวต้านทาน: 16A / 250VAC
ภาระที่ราบเรียบ: 10A / 250VAC
โหลดหลอดไฟ: 2000 วัตต์

●การสลับผู้ติดต่อ: 1 สวิตช์เปลี่ยน
●แบตเตอรี่สำรอง: 3 ปี (แบตเตอรี่ลิเธียม)
●อุณหภูมิแวดล้อม: -10 ~ 40 ℃
●ความชื้นแวดล้อม: 35 ~ 85% RH

คู่มือการใช้งาน

1. ครั้งแรกใช้สวิตช์นี้โปรดกดปุ่มรีเซ็ต
2. ครั้งแรกสวิตช์เปิดทำงานจะอยู่ในโหมด 24 ชั่วโมง หากต้องการเปลี่ยนเป็นโหมด 12 ชม. โปรดกดปุ่ม “” 5 วินาที
และจอ LCD จะแสดง AM หากคุณต้องการเปลี่ยนเป็นโหมด 24 ชั่วโมงและกดปุ่ม “” เพื่อกลับ 5 วินาที
3. การตั้งโปรแกรม: ตั้งเวลาเปิดเครื่องและปิดเครื่องพร้อมกัน 30 วินาทีเพื่อควบคุมเสียงระฆัง

https://www.timer-switch.com/ahc15a-lcd-weekly-programmable-timer-switch.html

أسبوعي مبرمج Timer AHC15A

أسبوعي مبرمج Timer AHC15A

أسبوعي مبرمج Timer AHC15A

● DIN RALL التثبيت
● الإعداد المسبق المتقدم قبل أسبوع واحد
● تبديل الوقت الغرض الإلكترونيات الرقمية الرقمية مع اليومية والبرامج
● ﻗم ﺑﺗﮐرار اﻟﺑراﻣﺞ ﺑﺎﺳﺗﺧدام 16 ﺿﺑط ﺗﺷﻐﯾل / إﯾﻘﺎف ﺗﺷﻐﯾل ، و 18 ﺑرﻧﺎﻣﺞ اﻟﻧﺑﺿﺎت ، واﻹﻋداد / إﯾﻘﺎف اﻟﺗﺷﻐﯾل ﯾدوﯾًﺎ
● احتياطي طاقة بطارية ليثيوم عند قطع التيار الكهربائي.
● ﺗﺼﺤﻴﺢ ﺧﻄﺄ اﻟﻮﻗﺖ اﻟﺘﻠﻘﺎﺋﻲ ± 30 ﺛﺎﻧﻴﺔ أﺳﺒﻮﻋﻴﺎً

● تصنيف الجهد: 220VAC 50 / 60HZ
● الحد من الجهد: AC 180V ~ 250V
● Hysteresis≤2 ثانية / يوم (25 ℃）
● ON / OFF العملية: 16 ON و 16 OFF ، نبض 18 مرة
● استهلاك الطاقة:
● العرض: LCD
● خدمة الحياة: ميكانيكي 107
● كهربائيا 105
● الحد الأدنى للفترة: دقيقة واحدة
● الوزن: 150 غرام تقريبًا

● Count: down: 1 sec- 99min 59sec
● النبض: 1 ثانية – 99 دقيقة 59 ثانية
● قدرة التحميل: حمولة مقاوم: 16A / 250VAC
الحمل المتخلف: 10A / 250VAC
تحميل مصباح: 2000W

● تبديل الاتصال: 1 تبديل التحول
● احتياطي الطاقة: 3 سنوات (بطارية ليثيوم)
● درجة الحرارة المحيطة: -10 ～ 40 ℃
● الرطوبة المحيطة: 35 ～ 85٪ RH

تعليمات التشغيل

1. أول مرة استخدام هذا الوقت التبديل ، يرجى الضغط على مفتاح إعادة تعيين.
2. في المرة الأولى ، تبديل الوقت في وضع 24 ساعة. إذا كنت تريد التغيير إلى وضع 12h ، فيرجى الضغط على “” Key 5 sec.
و LCD سوف يعرض AM إذا كنت تريد rechang إلى وضع 24h ، ثم اضغط على “” مفتاح 5 ثانية للعودة.
3. البرمجة: تعيين على ووقت الخروج.لقد 30 ثانية للسيطرة على الجرس

https://www.timer-switch.com/ahc15a-lcd-weekly-programmable-timer-switch.html

ЕЖЕНЕДЕЛЬНЫЙ ПРОГРАММИРОВАННЫЙ ТАЙМЕР AHC15A

ЕЖЕНЕДЕЛЬНЫЙ ПРОГРАММИРОВАННЫЙ ТАЙМЕР AHC15A

ЕЖЕНЕДЕЛЬНЫЙ ПРОГРАММИРОВАННЫЙ ТАЙМЕР AHC15A

● Установка DIN RALL
● Предварительная предварительная установка за неделю до
● Цифровой электронный переключатель времени общего назначения с ежедневными программами
● Повторять программы с 16 настройками включения / выключения, 18-кратными импульсными программами и вручную включать / выключать
● Заряд батареи от литиевой батареи при отключении электропитания.
● Автоматическая коррекция ошибок по времени ± 30 секунд, еженедельная

● Номинальное напряжение: 220 В переменного тока 50/60 Гц
● Предел напряжения: AC 180v ~ 250v
● Гистерезис≤2 с / сутки (25 ℃)
● Работа ВКЛ / ВЫКЛ: 16 ВКЛ. И 16 ВЫКЛ., 18-кратный импульс
● потребляемая мощность:
● Дисплей: ЖК-дисплей
● Срок службы: mechancally 107
● Электрически 105
● минимальный интервал: l минута
● вес: около 150 г

● Количество: вниз: 1 с – 99 мин. 59 сек.
● импульс: 1 с – 99 мин. 59 сек.
● Грузоподъемность: резистивная нагрузка: 16A / 250VAC
Отложенная нагрузка: 10A / 250VAC
Нагрузка лампы: 2000 Вт

● Переключающий контакт: 1 переключающий переключатель
● запас хода: 3 года (литиевая батарея)
● Температура окружающей среды: -10 ~ 40 ℃
● Влажность окружающей среды: 35 ~ 85% относительной влажности

ИНСТРУКЦИЯ ПО ИСПОЛЬЗОВАНИЮ

1. В первый раз используйте этот переключатель времени, нажмите кнопку сброса.
2. В первый раз переключатель времени находится в режиме 24 часа. Если вы хотите изменить режим 12 часов, нажмите клавишу «» 5 сек.
   На ЖК-дисплее отобразится AM. Если вы хотите перекьютировать в 24-часовой режим и нажмите кнопку «» 5 секунд для возврата.
   3.Программирование: установка включено и выключено в одно и то же время. Для управления колоколом требуется 30 секунд

https://www.timer-switch.com/ahc15a-lcd-weekly-programmable-timer-switch.html

Ultrasonic Sensor Waterproof UB1500 30GM U V1

Ultrasonic Sensor Waterproof,ultrasonic sensor working | Timer-Switch.com

Ultrasonic Sensor Waterproof UB1500 30GM U V1

Ultrasonic Sensor Waterproof UB1500 30GM U V1

Ultrasonic Sensor Waterproof UB1500 30GM U V1

External synchronization
The sensor can be synchronised by the external application of a square wave voltage. A synchronisation pulse at the synchronisation
input starts a measuring cycle. The pulse must have a duration greater than 100 μs. The measuring cycle starts with
the falling edge of a synchronisation pulse. A low level > 1 s or an open synchronisation input will result in the normal operation
of the sensor. A high level at the synchronisation input disables the sensor. Two operating modes are available:
1. Multiple sensors can be controlled by the same synchronisation signal. The sensors are synchronised.
2. The synchronisation pulses are sent cyclically to individual sensors. The sensors operate in multiplex mode.

Internal synchronization
The synchronisation connections of up to 5 sensors capable of internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an unsynchronised manner to teach the evaluation limits.

Note:
If the option for synchronisation is not used, the synchronisation input has to be connected to ground (0V) or the sensor has to
be operated via a V1 cable connector (4-pin).

Adjusting the evaluation limits
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply
voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs
indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught
with -UB, A2 with +UB.
Two different output functions can be set:
1. Analogue value increases with rising distance to object (rising ramp)
2. Analogue value falls with rising distance to object (falling ramp)
Evaluation limits may only be specified within the first 5 minutes after
Power on. To modify the evaluation limits later,
the user may specify the desired values only after a new Power On.
Download product details Including the size,Installation information and product functionality information

Downloads PDF Ultrasonic-Sensors-UB1500-30GM-U-V1:

Ultrasonic-Sensors-UB1500-30GM-U-V1(3)

Ultrasonic Sensor Circuit UB2000-30GM75 I V1 | timer-switch.com

http://www.timer-switch.com/ultrasonic-sensor-circuit-ub2000-30gm75-i-v1.html

Ultrasonic Sensor Circuit UB2000-30GM75 I V1

Ultrasonic Sensor Circuit UB2000-30GM75 I V1

Ultrasonic Sensor Circuit UB2000-30GM75 I V1

Internal synchronization
The synchronisation connections of up to 5 sensors capable of internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an unsynchronised manner to teach the evaluation limits.

Note:
If the option for synchronisation is not used, the synchronisation input has to be connected to ground (0V) or the sensor has to
be operated via a V1 cable connector (4-pin).

Adjusting the evaluation limits
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply
voltage – UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs
indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught
with – UB, A2 with + UB.
Two different output functions can be set:
1. Analogue value increases with rising distance to object (rising ramp)
2. Analogue value falls with rising distance to object (falling ramp)
Evaluation limits may only be specified within the first 5 minutes after
Power on. To modify the evaluation limits later,
the user may specify the desired values only after a new Power On.

TEACH-IN rising ramp (A2 > A1)
- Position object at lower evaluation limit
- TEACH-IN lower limit A1 with – UB

- Position object at upper evaluation limit
- TEACH-IN upper limit A2 with + UB

TEACH-IN falling ramp (A1 > A2):
- Position object at lower evaluation limit
- TEACH-IN lower limit A2 with + UB
- Position object at upper evaluation limit
- TEACH-IN upper limit A1 with – UB

Default setting
A1: unusable area
A2: nominal sensing range
Mode of operation: rising ramp
Download product details Including the size,Installation information and product functionality information

Downloads PDF Ultrasonic-Sensors-UB2000-30GM75-I-V1:

Ultrasonic-Sensors-UB2000-30GM75-I-V1(2)

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Adjusting the switching points
The ultrasonic sensor features a switch output with two teachable switching points. 
These are set by applying the supply voltage – UB or + UB to the TEACH-IN input.
The supply voltage must be applied to the TEACH-IN input for at least 1 s.
LEDs indicate whether the sensor has recognised the target during the TEACH-IN procedure. 
Switching point A1 is taught with – UB,A2 with +UB. Five different output functions can be set.
Window mode, normally-open function.
Window mode, normally-closed function.
One switching point,normally-open function
One switching point,normally-closed function.
Detection of objet presence.
Switching point, Setting distance only after power on. The internal clock can assure can’t be changed after 5 mins when power
on. If want to change the switching point, the user can only setting the request distance after power restart.
Download product details Including the size,Installation information and product functionality information

Downloads PDF Ultrasonic-Sensors-UB2000-30GM-E5-V1:

Ultrasonic-Sensors-UB2000-30GM-E5-V1(2)

Buy Ultrasonic Sensor UB2000 30GM U V1

Buy Ultrasonic Sensor UB2000 30GM U V1

Buy Ultrasonic Sensor UB2000 30GM U V1

Internal synchronization
The synchronisation connections of up to 5 sensors capable of internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an unsynchronised manner to teach the evaluation limits.

Note:
If the option for synchronisation is not used, the synchronisation input has to be connected to ground (0V) or the sensor has to
be operated via a V1 cable connector (4-pin).

Adjusting the evaluation limits
The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply
voltage – UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs
indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught
with – UB, A2 with + UB.
Two different output functions can be set:
1. Analogue value increases with rising distance to object (rising ramp)
2. Analogue value falls with rising distance to object (falling ramp)
Evaluation limits may only be specified within the first 5 minutes after
Power on. To modify the evaluation limits later,
the user may specify the desired values only after a new Power On.

TEACH-IN rising ramp (A2 > A1)
- Position object at lower evaluation limit
- TEACH-IN lower limit A1 with – UB

- Position object at upper evaluation limit
- TEACH-IN upper limit A2 with + UB

TEACH-IN falling ramp (A1 > A2):
- Position object at lower evaluation limit
- TEACH-IN lower limit A2 with + UB
- Position object at upper evaluation limit
- TEACH-IN upper limit A1 with – UB

Default setting
A1: unusable area
A2: nominal sensing range
Mode of operation: rising ramp
Download product details Including the size,Installation information and product functionality information

Downloads PDF Ultrasonic-Sensors-UB2000-30GM-U-V1:

Ultrasonic-Sensors-UB2000-30GM-U-V1(2)

Ultrasonic Sensor, Buy Ultrasonic Sensor | Timer-Switch.com

Ultrasonic Sensor

Buy Ultrasonic Sensor UB2000 30GM U V1

Buy Ultrasonic Sensor UB2000 30GM U V1 Buy Ultrasonic Sensor UB2000 30GM U V1 Internal synchronizati

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Long Distance Ultrasonic Sensor UB2000 30GM E5 V1 Long Distance Ultrasonic Sensor UB2000 30GM E5 V1

Ultrasonic Sensor Circuit UB2000-30GM75 I V1

Ultrasonic Sensor Circuit UB2000-30GM75 I V1 Ultrasonic Sensor Circuit UB2000-30GM75 I V1 Internal s

Ultrasonic Sensor Waterproof UB1500 30GM U V1

Ultrasonic Sensor Waterproof UB1500 30GM U V1 Ultrasonic Sensor Waterproof UB1500 30GM U V1 External

Ultrasonic Sensor Application UB1000 18GM E4 V1

Ultrasonic Sensor Application UB1000 18GM E4 V1 Ultrasonic Sensor Application UB1000 18GM E4 V1 TEAC

Ultrasonic Sensor Manufacturers UB1000 18GM75 I V1

Ultrasonic Sensor Manufacturers UB1000 18GM75 I V1 Ultrasonic Sensor Manufacturers UB1000 18GM75 I V

Low Power Ultrasonic Sensor UB800 18GM E5 V1

Low Power Ultrasonic Sensor UB800 18GM E5 V1 Low Power Ultrasonic Sensor UB800 18GM E5 V1 TEACH-IN w

Buy Ultrasonic Sensor UB500 18GM75 U V1

Buy Ultrasonic Sensor UB500 18GM75 U V1 Buy Ultrasonic Sensor UB500 18GM75 U V1 External synchroniza

timer switch any-180 | timer-switch.com

Timer Switch, 24h Timer Switch, programable time switch,ANY-180

Time Switch(Timer, 24 hour timer,programable time switch, programable time)
Features:
1) Type: ANY-180
2) Time range: 24 hours
3) Contact capacity: 16A, 220V AC
4) Coil voltage: AC 110, 220, 230, 240V
5) Electrical life: 100,000 times
6) Mechanical life: 10,000,000 times
7) Working reserve time: 150 hours
8) Minimum setting unit: 15 minutes
9) Set-up times: 96 times
10) Operating temperature: -40 – +50°C
11) DIN rail mounting

Timer Switch, 24h Timer Switch, programable time switch,ANY-180

Timer Switch, 24h Timer Switch, programable time switch,ANY-180

Product Name: Timer Switch ANY-180,programable time Price: $12.48

Voltage :230VAC220VAC

• With similar foreign products have the exact same functionality
• For special products please send the product workflow and demand
• If the products have any upgrades, we do not notice.

Download product details Including the size,Installation information and product functionality information

Downloads PDF Programmable timer ANY-180:

Programmable timer ANY-180(68)

any-180, programmable timer

Timer Switch,programable Switch,24 hour timer,7 Day Timer,ATP1003

7 Day Timer,ATP1003, Timer Switch, programable Switch, 24 hour timer

Time Switch(timer, timer switch,automatic switch,delay switch,automatic switch, weekly switch)
Features:
1) Type: ATP1003, daily and weekly programmable Switch 7Day Timer
2) Time range: 24 hours or 1 week
3) Contact capacity: 16A, 220V AC
4) Coil voltage: AC 220 – 240V
5) Electrical life: 100,000 times
6) Mechanical life: 10,000,000 times
7) Working reserve time: 15 days
8) Expectance display: LCD
9) Set-up times: 20 ON/OFF
10) Operating temperature: -40 – +50°C
11) DIN rail mounting

7 Day Timer,ATP1003, Timer Switch, programable Switch, 24 hour timer

Timer Switch,programable time,24 hour timer,7 Day Timer,ATP1003

Product Name: Programable Switch ATP1003,7 Day Timer
Price: $12.48

Voltage :230VAC220VAC110VAC12VDC24VDC

• With similar foreign products have the exact same functionality
• For special products please send the product workflow and demand
• If the products have any upgrades, we do not notice.

Download product details Including the size,Installation information and product functionality information

Downloads PDF ATP1003 Programmable time switch:

ATP1003 Programmable time switch(63)

programmable time switch, atp1003

—————————————————————————————————————————————————-

We are searching for products agent and dealer. have our own factory. We have the ability of written software and die sinking of developing new products. More reliable products Large number using the MCU our products,We hope that you allow us to get a new product development,This will enable us to be more long-term cooperation,If you now or in future will purchase these products, please downloads PDF,We look forward to your mail,We will offer you the best products and service,we products include 24h Timer,Timer Relay,Digital Timer,Counter,Floatless Relay,Sockets,proximity switch,photoelectric switch,solid state relay,Switch power supply,Rev.preventing relay.
Shopping:
1. We can shipping all over the world by DHL , TNT ,UPS , FedEx and EMS . The packaging is very safe and strong. If you have any special needs please nitfy me.
2. If you choose the DHL.It will take around 1-3days to reach your shipment No.
If you choose the others,it will take around 3-5 days to reach your shipment No.
Warranty & Guarantee :
All components we sell the quality with 30 days Return policy from the day of shipment.
If you have any other questions please feel free to contact with me in any time.